Skip to content
Invite-only, for now.

Changelog

Follow along with this ongoing list of changes:

Your first drop comes first

New to Crafd? There’s no first question any more. You go straight to your first drop, with the short hello from Dave opening over it. Save and preview as many drafts as you like: a preview is visible only to you, and offers Get ready for launch until your shop is ready, then Publish drop.

Setup is now your Launch checklist, with Add a drop at the top and Connect to get paid for payouts. A package you add while making a drop counts toward shipping.

Curious how a busy studio looks? Show mock data, beside Bugs/Feedback, fills your studio with sample drops, orders and followers only you can see. Remove mock data takes them away again. It’s a one-time choice, offered until your first real drop goes public.

What’s on my launch checklist?

Reframe your drop photos

Choose which part of each photo shows. Every photo in the drop editor has a crop button that opens the whole photo, so you can frame it for Square, used on the drop page, cards and thumbnails, and for Main, used in the Studio preview, shop cards and featured drops.

Drag the frame, use the arrow keys, or zoom and move it with the sliders, then choose Done. Your framing is kept when you save the drop, and your original photo is never changed.

A check on what drops include

A drop’s words and photos are now checked when you publish it, and again for whatever you change after that. Private drafts aren’t checked.

If something can’t be published, nothing goes live or changes. The editor marks the field, or the photo by its number, that needs another look, and links to a guide on what a drop can’t include, and what is fine, like figure drawing or knives. Edit it and publish again, and your saved draft stays as it was.

What can’t a drop include?

Close your account

You can now close your Crafd account yourself. In Settings → Profile, below Save changes, choose Close account, read what happens, and type your username to confirm.

We email you a copy of your data first. Then your shop, profile, drops, photos and followers are deleted for good. Buyers keep their orders, without your name, and your Stripe account is disconnected from Crafd, not deleted. You can close once every order is shipped or handed over and no refund, dispute or payout is waiting.

How do I close my account?
The Close account section in Settings, with a short note and a Close account button.

A darker dark mode

Dark mode in the studio is darker now: a deep navy, close to black, in place of the brighter blue it used before. Panels and fields are darker too, while main buttons keep Crafd’s blue.

Pickup without packages

If buyers only ever collect from you, you can skip the shipping setup. In Shipping settings, turn on Offer local pickup, turn off Ship orders, and save: no package, weight, size, destinations or rates needed. You still add your private address, since it sets where pickup is taxed.

With no packages saved, new drops start out as pickup, and a pickup drop needs just its Pickup location.

Can I offer local pickup?

A quick hello from Dave

New to Crafd? Before you answer the first question, a short video from Dave, the person behind Crafd, says why it exists and how to share feedback along the way. It’s about 36 seconds. Close it whenever you like, and it won’t open again in that browser.

A quicker checkout

Less typing between a buyer and your work. Checkout asks for their email and name first, then delivery. The apartment or suite line stays tucked away until it’s needed, and billing matches the shipping address unless they untick the box.

The total shows before they type anything, and the button names it: Pay $58.95. One press points out everything still missing, and each note clears as soon as it’s fixed.

How do buyers pay?

Carriers on tracking

Buyers now know where to follow their package. When you mark an order shipped, Crafd suggests the carrier from the tracking number and you confirm it, or choose Other and give the carrier’s name and, if you like, a link to the parcel’s tracking page. The carrier is named beside the tracking reference in the buyer’s email, text and order page. Fix tracking corrects a shipped order’s details later without another message to the buyer.

How do I mark orders shipped?

A new maker page

Your maker page is the link you share, so it now leads with you: your photo, name, what you make and where, your story, and your Instagram and Etsy links. Following you has one home on the page, and when you have a drop open or on the way, a Follow button at the top takes visitors straight to it.

Your work comes next. Each open drop gets a large card with its photo, description, price, how many pieces are left, when it closes, and a Shop this drop button. Drops on the way show their photo, price and opening time, and past drops stay on the page, marked sold out or ended, so visitors can see what you’ve made.

Times are shown in each visitor’s own time zone, with the weekday and how many days to go. And a page with no drops yet still looks the part: it says the first drop starts here, and invites people to follow along.

What is my maker page, and where do I find it?
Juniper Clay’s maker page at desktop width: a photo, name, craft, place, story and Instagram and Etsy links beside a Follow Juniper button, then the everyday mug open now with a Shop this drop button, and two mugs on the way with their opening times.
Open now, with more on the way.

Tailored onboarding

Start where you are. Before you set up your studio, Crafd asks when you’d like to make your first drop: immediately, on a specific date, or not yet, just to kick the tires. If you’re ready now or have a date in mind, you go straight to Setup.

Just looking around? Your studio opens with sample drops, orders, and followers that only you can see. When you’re ready, Remove mock data at the bottom right clears the examples and takes you to Setup.

The Crafd page that asks How should we proceed?, with three choices: Immediately, On a specific date, and Kick the tires.

Changelog

See what’s new on Crafd. Our changelog lists what we’ve shipped, newest first, and every entry has a link of its own to share. You’ll find it in the footer.

Help guides, now public

Find an answer before you sign in. Our public support center brings the Crafd guides together, with search and topics to help you find your way.

The Crafd support center: a search box under “A little help. Then back to making.” and help topics such as Getting started, Drops, and Shipping & pickup.
The public support center.

Multiple drop photos

Show your work from more than one angle. Add up to five photos to a drop, put them in order, and move your favorite to the front to make it the cover.

What photos can I use for a drop?
A drop page with a speckled mug as the cover photo, and four photo thumbnails below it.
The cover first, then the rest of the drop’s photos.

Gravatar profile photos

A familiar face, without another upload. If you haven’t added a profile photo, Crafd uses the Gravatar for your account email when one is available, or a plain head-and-shoulders picture otherwise.

How do I add or change my profile photo?
The top of a maker page for Wren Hollis, with the plain head-and-shoulders picture in place of a photo.
The picture Crafd shows when there’s no photo or Gravatar.

Help in the studio

Find an answer while you work. Search the help guides from your studio, keep them docked beside the page, or open them full screen.

The studio’s drops page with the help guide “How do I offer choices, like sizes or colors?” docked beside it.
A help guide, docked beside the studio.

Shipping-label export

A little less copying before your batch goes out. Download pending shipping orders as a CSV for a label tool like Pirate Ship, then import tracking back into Crafd when you mark orders shipped.

How do I buy and print shipping labels?
The Orders page with the Export orders menu open, offering CSV, PDF packing slips, and Labels for Pirate Ship.
Labels sits in the Export orders menu.

About Crafd

Meet Dave and the idea behind Crafd on our About page. It’s a little more about why we’re making room for small batches, and for the people who make them.

The About page headline: “A little more room for making.”

Studio setup checklist

A little guidance for your first batch. Your studio checklist walks through your profile, policies, delivery, payouts, and first drop, and keeps track as you go.

What’s on my launch checklist?
The studio setup checklist, four of five steps complete, with Connect your payouts still to do.
The checklist keeps track as you go.

Dark mode for the studio

For a quieter screen while you work, choose dark mode from the studio’s theme switch. Crafd remembers your choice for the next visit in that browser.

The studio’s drops page in dark mode: deep blue, with white type.
The studio, after dark.

Automatic drop updates

Keep your people in the loop as a batch comes together. Choose which drop updates followers receive by email or text, from an announcement to an almost-sold-out nudge; buyers also get order emails for shipping or pickup.

What do followers hear from me, and when?
Notification settings for followers: drop announced, opening soon, drop open and almost sold out, each with its own email and text switch.
Choose what your followers hear, and how.

The people behind Crafd

A familiar introduction on our home page. Crafd comes from the people behind WordPress.com, WooCommerce, and other tools you may know.

A “From the makers of Tumblr” badge above the home page headline, “More making, Less shopkeeping.”

Browser assistant support

Your browser assistant can find drops, draft a new one, and help prepare order updates in browsers with WebMCP support. Publishing stays in your hands, and fulfillment changes wait for your confirmation.

Follow makers by email and text

Keep in touch between batches. People can follow your maker page or a drop by email, and choose text updates too when you offer them.

How do people follow me?
A “Follow along” box on a maker page, with an email field and a Follow along button.
Following a maker takes just an email address.

Let’s make something good.

We’re inviting makers in a little at a time.
If this sounds like your kind of place, come join us.

Reserve your username

A small beginning. You could be part of it.